欢迎光临淄博耐火材料有限公司网站~!

Type of high alumina refractory brick

点击次数:   更新时间:19/04/18 13:18:04     来源:www.zibohengsen.com关闭分    享:
It is not difficult to classify a certain product. It is not difficult to say that it is easy. We only need to know the composition and structure of these products, so we can make a good distinction. The high alumina refractory bricks are back and forth. It is also possible to distinguish in this way.
For high-aluminum refractory bricks, if the construction is good, first of all, the mud material should be well matched. The mud material is usually made of coarse, medium and fine three-stage ingredients. The upper limit of coarse particles is usually 2-3mm, and the added amount is 40-50% for special-shaped products. The upper limit of the coarse particles can be reduced to 2-1 mm-0.1 mm, and the amount of the intermediate particles added is preferably 10-20%; the amount of fine powder of <0.1 mm should be controlled at 40-50%.
Production practice shows that appropriately increasing the size and number of coarse particles can increase the bulk density of high alumina refractory bricks and is easy to form. When firing, the secondary mullite around the material has a weak chemical reaction and is easy to sinter. However, there is a certain limit to the size of the magnified particles. If it is enlarged to 4-5 mm, it is easy to cause the phenomenon of missing corners, and the uniformity of the cut structure is also affected. Therefore, the maximum particle size is preferably 3 mm.
上一条:没有了
下一条:没有了